Help for sound design

Elektron Gear Syntakt
22

Great job!!

1 Like
23

Here are some snapshots.

First the the low end bass. There are no LFOs or anything so these three screens capture the whole sound.

IMG_9299
IMG_92994032×3024 1.64 MB
IMG_9300
IMG_93004032×3024 1.65 MB
IMG_9301
IMG_93013698×2792 1.44 MB

Next. Same goes for the gritty SRR part. Both sounds use the AHD volume envelope.

IMG_9302
IMG_93024032×3024 1.84 MB
IMG_9303
IMG_93034032×3024 1.86 MB
IMG_9304
IMG_93044032×3024 1.88 MB

Suggestions for improvements:

  • there is some stereo movement in the top end «grit» part, this could possibly be achieved by copying and duplicating the track, panning the original to the left and the copy to the right. Then add some very slight LFO to for example pitch on one of the tracks. Just a slight offset of one parameter or the other will create a stereo effect.
  • A lot more effort can be put into the amplitude envelope. Their are now similar for bort the low end and gritty part, but in the original track they differ a little.
  • Try running the gritty part through the FX track for some additional texture.

Have fun :slightly_smiling_face:

2 Likes
24

You are awesome !!!Big thanks for everythings !!

1 Like
25

Hello Clem, tried to reach you on messenger but it seems like you don’t get my messages. Am I missing something?