Help for sound design

Clemuyen · 2024-05-20T09:30:37.697Z

The bass coming at 0:43

natehorn · 2024-05-20T09:50:02.986Z

I think that you’re right that it’s a sort of dual-VCO supersaw sound but i sounds quite FM to me, there’s a kind of bell overtone to it. Could be a 3rd oscillator modulation/crossmod type deal.

natehorn · 2024-05-20T10:01:43.283Z

I took this in a slightly different direction, using Ableton’s Wavetable and adding some unison, but I feel like it’s a similar vibe. That’s using a couple of Saw tables with FM applied.

0e0 · 2024-05-20T18:05:03.236Z

lfo fun with the SY BITS engine could get you there.

DavidL · 2024-05-20T18:12:59.887Z

Sounds like the ringing sound is a separate sound. There’s off beat bass, and the ringing follows that (has a delay on it), occasionally does a double hit where the bass does not

Jindrek · 2024-05-20T18:48:34.100Z

What DAW are you using, maybe I can help. Wavetable for sure, but not all of it. If you are using Ableton there is a new module called Bass.amxd that has all the above. Oh syntakt jesus. If it has a ring modulator, then you should get the initial sound fairly quickly.

emadb · 2024-05-20T19:09:19.056Z

I found this sample that seems very similar:

Clemuyen · 2024-05-20T19:29:56.553Z

Nice try !!THANKS

Clemuyen · 2024-05-20T19:30:48.981Z

No DAW, only Syntakt and Digitakt

Clemuyen · 2024-05-20T19:31:43.349Z

Yes but I wan’t try to redo with the Syntakt !

elxsound · 2024-05-20T19:32:19.656Z

Can’t joint the fun now but have you tried modulating the filter resonance? maybe a square wave?

Nils · 2024-05-20T20:10:09.504Z

I would layer two sounds:

The low end using SY BITS with low pass filtering
The overtone part using a high pass filtered SY BITS with both srr and brr. Maybe som overdrive as well.

This way you can adjust the two parts of the spectrum independently - making the low end sit tightly, and give the top end the right amount of grit/edge.

OldmanChompski · 2024-05-20T20:26:29.505Z

yeah, layering sounds is really the only way I can think of getting close. The other thing is this bass is very stereo which sounds like either chorus or some other effect. Definitely difficulty to get this exactly sound with just a syntakt. Maybe closer with a Syntakt and a Digitakt 2 using its chorus.

Nils · 2024-05-21T04:35:13.627Z

I had a go at this. Didn’t quite get there with the dryness/tightness of the sub bass. You may try using the SY Raw for the sub to improve it. Also there’s a lot of compression in this track affecting the amplitude envelope of the bass sound, which is a bit tricky to mimick.

Clemuyen · 2024-05-21T05:13:07.108Z

Oh yes, it’s very near !
Could you share this sound please.
Thx

jiffybox · 2024-05-21T05:25:38.482Z

This reminds me of Jamie Lee Curtis being chased through a dark hospital hallway by a masked killer. In a good way.

Nils · 2024-05-21T05:57:29.789Z

@jiffybox Lol!

@Clemuyen Sure, will post some info and pics of the screen when I get home tonight.

alechko · 2024-05-21T06:00:13.152Z

lazy 3 minutes-ish rytm attempt

(dang missed the Syntakt category mark, sorry for polluting)

Clemuyen · 2024-05-21T06:31:17.258Z

Thank you !

hausland · 2024-05-21T07:21:06.296Z

Great job!!