Feature request: Auto-save recorder buffers to Project Folder

rhizome · 2014-04-13T17:33:54.000Z

yeah… batch saving to any folder with maybe a wild card naming scheme a la reaper would be very welcomed. who can ever remember what R6 was that one day last month…

glaciertree · 2014-04-14T00:03:23.000Z

+1 to auto saving all record buffers with one command

clarknova · 2014-04-14T09:38:34.000Z

you can save all recorder buffers if you go into the sample setup screen and press func + edit. there is a save all command there.

clarknova · 2014-04-14T09:41:20.000Z

i think saving the recorder buffers is easy enough. my feature request is that they simply don’t have to be purged when i turn off ot / change project unless i want them to.

secretmusic · 2014-06-17T13:10:32.000Z

[quote=“” Baddcr""]
Apologies if I did something to offend people… I have no idea what though!

I’ve seen loads of newbie posts and all receive a warm welcome? What gives? Why no reply?

Is it really that stupid a question?
[/quote]

Relax, you did not offend anyone, but you’re asking a question to which you have already answered yourself. There isn’t much to add. What you’re doing is fine, and that’s about all there is to say about it you’re not missing anything.
Cheers !

myonemanband · 2014-06-19T23:08:03.000Z

It is interesting to read this thread as I am desperate to have the octatrack FORGET ALL settings upon power down…

the reason being 1. I am a musician who improvises from a blank canvas in each performance and 2,that this is how ALL my other hardware works Electribes, Emu Command Station… Echoplex loopers…everthing I have owned alwas “forgets” what you where doing UNLESS you press save… it is just a small thing but having that extra step in the heat of setting up for a gig (with a load of other things I HAVE to pre-flight) means that I often mean to start quietly but actually manage to blow the start with the loudest most twisted version of whatever I was mangling into a climax in my last gig before shutting off. …

both needs makes me realise that OPTIONS are the key.

secretmusic · 2014-06-21T22:58:31.000Z

""myonemanband"":

It is interesting to read this thread as I am desperate to have the octatrack FORGET ALL settings upon power down…

the reason being 1. I am a musician who improvises from a blank canvas in each performance and 2,that this is how ALL my other hardware works Electribes, Emu Command Station… Echoplex loopers…everthing I have owned alwas “forgets” what you where doing UNLESS you press save… it is just a small thing but having that extra step in the heat of setting up for a gig (with a load of other things I HAVE to pre-flight) means that I often mean to start quietly but actually manage to blow the start with the loudest most twisted version of whatever I was mangling into a climax in my last gig before shutting off. …

both needs makes me realise that OPTIONS are the key.

Options are, indeed, the way to make everyone relatively happy

In your case, I would think that it would be easy enough to set up a “starting” template, save and sync it to card, then when performing, you can do what you want, and when you’re done, just recall your template

I, for one, am really happy that Elektron kit is always in a “save” state. Helps with the flow, for me at least !

Cheers.

simonhold · 2016-09-08T16:15:10.539Z

clarknova:

you can save all recorder buffers if you go into the sample setup screen and press func + edit. there is a save all command there.

Yes, this is true.
And this is how I use this function now.
But you still need to name every sample completely instead of with some smart auto-naming scheme.
And then you still need to reload your samples into free slots (Flex or Static) if you want the recording buffers to be cleared. And then you still need to save your Part and your Project.

My request is to automate all of this based on the Project Name with one menu command.
I really don’t think further than ‘Pattern D7 was is slammer and will fit right in the Live groove I have going here’ when playing live. So having samples auto-named ‘Slammer-R1-016’ or ‘TIGHTSHIT-R7-097’ is fine for me. In fact, that would be more clear than what I name my samples now

adnauseam · 2019-07-19T05:15:51.217Z

A quicker way to save samples would be rad. Doing it manually is tedious. Have a process that automates saving. Something like [T1}+Play or Function+T1+Play for eg. The file name could just be the date and time. You could always rename the sample later. I think we’ll never see new features for the OT.

I don’t mind naming things as required - the hard part is remembering WHAT to name things esp if you’re going to sample a bunch of different drums and name them BD-001, BD-002… I forget where I am and what I"ve already saved. I wish there was a little file browser that came up when you named things to make this easier.

Again. We’ll never see these features. Perhaps Elektron will learn from these mistakes during the development of the next new thing.

roadmoviemusic · 2019-07-19T16:44:36.701Z

Can’t believe I’m reading a thread from 6 years ago and that this hasn’t been dealt with…

robotron · 2019-10-22T20:42:27.519Z

It’s the most painful omission in the Octatrack for me and adding something like this would transform how it could be used. A single command ‘save all buffers to static/self’ (or even flex would be fine if that’s easier) that you could assign to a MIDI note/footswitch would be amazing.

I record intro/verse/chorus/variations as separate parts on 3/4 tracks (bass/guitar/synths) and it’s a real wrench to go from making music to file management/sample allocation every time I want to record a new part. The only way to avoid it that I’ve heard of is to use multiple tracks set to the same record buffer (to change the parts on another single track) which is an insane workaround.

robotron · 2019-10-22T20:47:33.497Z

To be honest even a single ‘save to self’ menu option that frees up the record buffer to use for a new part on the same channel would be a big improvement for me as it needs to be done so many times when building a track like this live.

johnbitwig · 2021-05-23T23:02:19.219Z

Plus 1.000.000

Command for:

Save all current rec buffers to pool and load into track 1 to 8 (assign to self) after saving them into a specified folder on the CF card.

It’s so messy and tedious currently.

Blasted_pingin · 2021-05-23T23:59:33.610Z

+3,5 billions… and 10 more years probably.

sezare56 · 2021-05-24T09:22:59.510Z

Yep. Improvements please…

Even Save All Recordings is not satisfying, with assign to self choice only. It don’t like this choice, because these assignments remain on all parts, hence these saved samples are loaded with any recording buffer.

johnbitwig · 2021-05-24T17:40:36.426Z

Plus all of the atoms in the universe

asger60 · 2021-06-02T20:48:20.228Z

+1
this would be sweet!

Flymo · 2023-02-09T08:32:18.721Z

+1 this would be an easy fix in next firmware. Do we think elektron read these threads?

sezare56 · 2023-02-09T08:37:08.971Z

Flymo:

Do we think elektron read these threads?

They probably read main “feature request” threads for each Elektron, but if you write them directly, I think it has more impact.

Create a bot and spam them with your feature requests.
(Joke)
feature-request@elektron.se

sir-vector · 2023-10-12T17:22:37.396Z

It would be amazing to have an „auto out channel“ setting (in addition to the already available „auto in channel“) that would send note information from the sequencer on the currently selected track out over midi on a specific channel.

I love the Analog Keys where when you press a step you instantly see which notes are assigned to it. I would love to have this feature but for every Elektron box when using an external midi keyboard with LEDs over the keys (eg Novation 49SL mkiii) or a grid controller with LEDs per pad (eg Ableton Push 3). One would specify an „auto out channel“ (in addition to the currently available „auto in channel“) and the note per step information on the currently selected track would be sent over that midi channel. So utilizing a midi out channel not to trigger external instruments but just to visualize sequencer note information on the currently selected track.