Hey everyone, I’m losing MIDI data somewhere in my chain and could use some eyes on it.
Setup & Routing:
Faderfox MX12 (USB) → Ableton Live → E-RM Multiclock → AR, A4, OT (DIN)
Ableton tracks are routing MX12 (All Channels) directly to Multiclock Ports 1-4.
The Issue: Zero response from the Elektrons when moving faders on FaderfoxMX12.
If I bypass the PC and plug the MX12 directly into the Elektrons via DIN, the custom mappings work perfectly.
Since the preset is fine, something in the USB → Ableton → Multiclock path is filtering or breaking the CC data. Any specific settings I should check across these devices? (AI troubleshooting failed me). Thanks!
while you’re waiting for their response, you could try some additional trouble-shooting:
Have you tried setting the Multiclock to “internal” sync, and then plugging the DIN out of the MX12 to the DIN in on the Multiclock? That takes Ableton out of the equation, and if this works, you’ll know that the issue isn’t the Multiclock
Have you tried using a simple MIDI monitoring program like “MIDI-OX”? I think you can plug a MIDI cable from the computer’s MIDI out to the computer’s MIDI in, while running Ableton with the MX12 connected via usb, and then check to see what’s actually being sent from Ableton via your computer’s DIN out
Since the preset works over DIN, I’d split the USB route into legs and test each one.
With Live closed, look at what the MX12 sends over USB. If kick CCs arrive on channel 1 and BT on channel 5, the controller side is fine.
In Live’s MIDI preferences, make sure Track is on for the MX12 input and for each Multiclock output port. Remote on its own doesn’t pass anything through tracks.
A Live MIDI track sends everything on the one channel picked under MIDI To. MX12 on All Channels into port 1, channel 1 puts your BT data on channel 1 too, so use one track per destination channel, monitoring on In.
To see what Live sends, route a track to a virtual port (IAC Driver on a Mac, loopMIDI on Windows) and watch that. Same idea as MIDI-OX above, minus the loopback cable.