DT/ST/DN stand - limited time Ikea line

natehorn · 2022-10-06T12:46:02.245Z

AIKO:

Well, surely that could work if screwed down to the table, but then I would have to make up my mind about its position lol.

haha - I think for most angles it would work fine freestanding - but I like the idea of screwing it to a wall - extra desk space

djst · 2022-10-06T12:57:56.368Z

bibenu:

They certainly LOOK like they would slide all over the place at the slightest touch.

It’s not that bad actually. I have a standard Ikea desk, some wood top, and I can bang on the Syntakt buttons pretty hard without it moving around. That said, it does shake a little, but not enough for me to even think about it. But yeah, some friction does help. Even just a little black electrical tape around the feet/bar would surely eliminate the problem altogether.

monocolor · 2022-10-12T19:47:17.803Z

There are actually two angles, although not quite officially Works great with the flatter angle.

flat-angle-12016×1512 336 KB

flat-angle-22016×1512 308 KB

Artsutanav · 2022-10-12T20:10:15.847Z

Thank you.

Still too high but I’ve manage to find something suitable for the DT, DN and ST.

I set them on the lowest notch.

image1168×1321 134 KB

captain8 · 2022-10-12T20:16:57.566Z

link to those?

Artsutanav · 2022-10-12T20:22:13.754Z

amazon.co.uk

Laptop Stand Foldable, Laptop Holder Ventilated Desktop Cooling Stand 7 Levels...

Laptop Stand Foldable, Laptop Holder Ventilated Desktop Cooling Stand 7 Levels Adjustable Aluminum Notebook Riser for MacBook Pro/Air, HP, Lenovo, Sony, Dell, More 10-15.6” Laptops - Black : Amazon.co.uk: Home & Kitchen

thesimplemachine · 2022-10-12T20:33:16.406Z

I was just about to post this. Mine isn’t the same exact brand/model but it’s basically identical. Pretty sturdy, adjustable angle and width to suit multiple devices, and it folds up nicely to fit in a travel case. Most of them are $15 or less too.

Easy to find if you search for “portable, adjustable laptop stand” on Amazon.

monocolor · 2022-10-12T20:40:47.125Z

Niiiiiice I definitely think yours are better as there are a few tiny issues with the ikea ones.

Artsutanav · 2022-10-12T21:14:56.003Z

They feel a bit wobbly when you unfold them but once a device is placed on it it’s absolutely fine. No sliding around either.

image4032×3024 3.45 MB

image3024×4032 2.67 MB

re5et · 2022-10-12T21:22:30.429Z

I use those cheap £2 plastic stands ikea made … no idea why they’d need Swedish house mafia involved other than obvious marketing nonsense. … are customers so easily duped ? Or maybe I’m too cynical.

thesimplemachine · 2022-10-12T22:16:30.671Z

Another bonus to these is that once I had my Syntakt propped up on it, instead of laying flat, the operating temperature dropped about 20°F. Not sure why, but it makes it run a lot cooler.

spacetravelmadeeasy · 2022-11-06T19:55:20.716Z

Just a wee heads-up.
Swedish House Mafia have done a collaboration with IKEA on a new range of limited edition items.
Really nice studio desk and also vinyl/turntable shelves. If I needed either of these I’d def had grabbed them.

https://www.ikea.com/gb/en/search/products/?q=OBEGR%C3%84NSAD

Instead I bought a few of the tablet/drum machine stands.

1400×1400

anokah · 2022-11-06T21:03:22.859Z

Was a bit disappointed by the desk when I saw this. Had hoped to get a cheap studio desk with a shelf for a big keyboard, but I realise my expectations were too high

Naboo · 2022-11-06T21:10:09.177Z

Might get the slippers

peaceful · 2022-11-06T21:28:34.414Z

The stand is a bit more upright than some other stands. It also holds my Syntakt a little bit raised up. The angle and height work well for me compared to other cheap~ish stands.

I like that it folds flat, too. Easy to travel with.

Matmcr · 2022-11-06T21:29:03.747Z

Reckon those Varidock are the best stands I’ve had. Cost more but built like tanks.

MIRAI

Modular Metal Stands for Synthesizers and Desktop Gear - Varidock

Varidock is a versatile system to build ergonomic stands for desktop synthesizers and small studio gear. With its growing range of custom mounts for brands such as Korg, Roland, Behringer, Moog, Waldorf and other manufacturers, Varidock is the ideal...

krunchr · 2023-01-02T21:51:33.694Z

I bought two Obegränsad tablet stands today. The stand fits perfectly to the Digitakt. As if it was created specifically for him. The fixed angle is okay for me. With the much lighter MC-101, the stand tends to slip. Here I will have to tinker something with rubber.

IMG_61051736×2137 772 KB

IMG_61022049×1669 861 KB

djenzyme · 2023-01-06T17:16:19.974Z

I’m trying to get hold of some of these stands and instead I’ve just acquired more computer rage.

Ikea website displays them as ‘in stock’ and ‘available for delivery’ and ‘available for collection’, but every time I get to the checkout it then displays it as ‘unavailable’, ‘out of stock’, and ‘not available for home delivery’. Then if I stop viewing my basket, they show up as available again.

Frustrating to say the least, it won’t even let me order from a different store. Ikea obviously don’t want my money. I have to say, their website is awful too, so bollox to them.

djst · 2023-01-06T18:51:19.915Z

djenzyme:

but every time I get to the checkout it then displays it as ‘unavailable’, ‘out of stock’, and ‘not available for home delivery

The irony - they call it OBEGRÄNSAD but the stock is anything but.

kraftradler · 2023-01-06T19:07:13.458Z

Those look bomber. I’ll pick some up. Thanks for the tip!