DT+DN the Ultimate?

HoldMyBeer · 2022-10-11T23:26:34.415Z

NightlyClosures:

With some compromise, I’ve really been able to shrink my footprint.

And you can also save money on shoes that way!

Gerry_Dorsey · 2022-10-11T23:49:02.295Z

This is a great combo and you can definitely get some amazing use out of it. My only issue with the DN is that it doesn’t have direct change, either cued or with mult-map. I do a lot of odd timed patterns with my DT (2 and 3 steps) so i need something with direct change to keep up. if it got direct change then this would be my go to combo.

NightlyClosures · 2022-10-12T01:35:08.597Z

rtme · 2022-10-12T06:07:41.980Z

Gerry_Dorsey:

so i need something with direct change to keep up.

Ryan:

Some users have even sworn on sequencing the digitone from the digitakt.

Meatwad · 2022-10-12T18:31:17.892Z

This sounds cool, I was using the DT to sequence the DN the other day, and noticed that trigless trigs in the DN (when pressed) acted as performance macros.

What do you mean by mod matrices on the DN?

DaveMech · 2022-10-12T18:43:12.989Z

Connect Digitakt + Digitone tutorial // Powerful and easiest method

Meatwad · 2022-10-12T19:02:27.236Z

Thanks Dave!

Dr.K · 2022-10-12T20:33:25.715Z

Actually removed syntakt from my setup to replace it with digitone again so I have this DT DN combo yet again.

Funny! I just did the same thing. Somehow the Syntakt made me miss the Digitone.

sloki · 2022-10-13T12:15:17.870Z

Beautiful combo that I had A LOT of fun with, but they led me to getting the A4 + AR combo which have worked perfectly for me (alongside the OT). I really liked the flexibility in terms of sound shaping, and the customisable performance features were exactly what I needed. Haven’t looked back!

prydal · 2022-10-13T14:25:35.911Z

so you would say you can do more on A4+AR+OT then DT+DN ?

Like, what are the big features for you that overrule one over the others?

sloki · 2022-10-13T16:21:02.870Z

I’ll try to approach both individually and leave out the OT as that’s a completely different beast and I mainly use it end of chain anyway as a mixer/master effects thing.

For me the comparison is between the DT + DN and AR + A4. I’ll say at first that I think they’re all awesome machines, and there’s enough difference between them, especially the DN and A4, to warrant having all 4 if you were so inclined. But there’s also a lot more similarities for me that made no sense to have them all. Plus I’m not made of money.

For the AR, one of the biggest selling points was the fact that I could make my own drums from scratch, but also layer samples on top. I love dialling in a sound, tweaking it, blending in a sample and tweaking that and just basically coming up with whatever I can or can’t imagine. I get a lot more enjoyment out of making sounds than flicking through samples and messing with them (though you can do a lot of what the DT can do in that regard on the A4, and whatever it can’t the OT can more than cover). The compressor is also amazing as is the distortion. It’s probably my favourite machine that I’ve ever owned. Also the VCO they introduced on it makes a really mean bass. The DT covers the sampling part better obviously, but there’s 0 drum synthesis and all the other bells and whistles that I wanted.

With the A4 it wasn’t as cut and dry as it’s a completely different sound. The DN is in many ways, depending on what kind of music you make, more flexible due to having four more voices. But in most other ways, the A4’s modulation and sound shaping options far exceed it imo. Per voice you get 2 LFOs and envelopes with 2 destinations each (on top of an LFO for vibrato and 2 for pulse width modulation), 2 oscillators and subs (easy way to hack in some chords if you want to get around the 4 voice limitation), 2 filters, awesome overdrive, and a whole load of other stuff that let you shape all kinds of crazy things. I think the DN is better for pads and airy type stuff and the A4 is a lot more aggressive, which suits me perfectly, but is also capable of some nice pads and also getting into really experimental territories.

The biggest factor for me though was the performance capabilities of the analog machines. Being able to have a set of fully customised performance macros has been the most fun part of all of it for me as one of my biggest qualms with the digi boxes was the control all thing (partly due to my own constantly forgetting to save before I did anything). I mainly use the machines to jam and the performance knobs and pads are what really make it shine. The sound design on them has also led to me using them in a lot of songs that I’ve done as I find it easier to come up with what I want, on the AR mainly, than on whatever drum synth VST.

I don’t care too much about analog vs digital, so that wasn’t a factor into my decision. If Elektron ever made a wavetable synth in the analog machines’ form factor I‘d buy it in a heartbeat.

tl;dr it’s sound design and superior performance flexibility that led me to get the analogs.

Also, Dark Trinity sounds a lot cooler than Digi Trinity.

malus_mons · 2022-10-13T17:13:01.658Z

Ultimate, all time, never need anything else (except a microcosm) setup. Never be bored or uninspired again.

Jeanne · 2022-10-13T17:16:55.102Z

In my experience, the A4 does sound huge, and the Digitone out of control brutal, though

However, I’m glad I have both. I didn’t really consider the Digitone and was blown away when I created patches from scratch and also used Overdrive and Master Overdrive.

I wish the A4 had Master Overdrive

Edit: And I just don’t like the analog drumsounds the AR does. That’s why I’d never consider the AR. With the A4 and the Digitone, however, I can make drumsounds that are amazing to my ear.

… Just giving my perspective

Tchu · 2022-10-13T17:20:08.395Z

Jeanne:

I wish the A4 had Master Overdrive

Pass it through DN? I don’t remember if the Ext inputs pass through the OD?

Jeanne · 2022-10-13T17:22:22.982Z

Tchu:

Pass it through DN?

Usually I’d have much more overdrive on the DN as I’d use for the A4 and I don’t want to suck the A4 away*. I’m actually looking into some analog distortion which is able to change (distortion) patches via Midi CC from the A4. But the Boum is too expensive for me, unfortunately.

*One of the greatest features of the Syntakt - again, for me - is that I can decide which tracks will be distorted together and which won’t.

sloki · 2022-10-13T17:28:03.615Z

Oh don’t get me wrong, I have nothing against the digitone! I was sad selling it. But the A4 just works and sounds so much better for me and the huge sound complements its brutality really nicely. I get the distortion covered on the OT so that helps too. Also 4 Elektron boxes at the same time is just impossible for me. I struggle enough with 3

I did however just buy this awesome new module today that does FM called the Ryk Modular Vector Wave and that sounds absolutely evil. It’s also polyphonic so that’s really cool.

Edit: just seen your part about the AR. It’s all a matter of what you like at the end of the day! Like I had the model cycles for a very very short period of time and got rid of it immediately.

Riuozami · 2022-10-13T17:38:23.472Z

The analog osc of the rytm are not great and outdated but when you use samples in the Rytm the filter add a full dimension and body to the samples

I don’ t have an A4 yet but I am not convinced about its sound yet at least for what i have heard so far

Jeanne · 2022-10-13T17:42:54.824Z

Well, the A4 does the drum sounds I want and doesn’t need samples And if I want samples, I have a Digitakt. But like I said, it’s a matter of taste. I merely want to point that out: Tastes are different, and approaches are different … what’s the (potential) ultimate combo is different for everyone.

Habit_Reform · 2022-10-13T21:33:34.622Z

DT/SY is killing it as a combo.

I’ve pretty much decided that the DT is too much of a ballache for doing anything involving ‘chopping’ breaks, at least for now, and stopped thinking of it as a Hip Hop combo and just making it one massively expanded House and Techno groove box.

Had my first few hours in a week or so where I was feeling like I had enough energy and time to sit down with them, and just had loads of fun getting some patterns flowing.

Matoshi · 2022-10-13T22:01:42.527Z

95% of my tunes are DN and DT they are the ultimate combo. For ‘Ultimate Max’ combo add an A4