Digitakt OS 1.40A (Now 1.40B) is here - Song mode fixes, Fill fixes

Mono_Lab · 2022-11-24T09:37:25.924Z

Apparently there is a bug on the Digitone with the func+no. Is it the case with Digitakt too ?

Uzinusa · 2022-11-24T09:50:05.799Z

[FUNC]+[NO] works fine on Digitakt after upgraded OS.

Mono_Lab · 2022-11-24T11:00:12.729Z

Great ! Thanks

wPEPEq · 2022-11-24T11:56:22.013Z

In SONG mode, if a song row was set to loop indefinitely, queuing another row to play did not have any effect since it was not prioritized over playing the indefinitely looping row.

This was bugging me the most!

kryten42 · 2022-11-25T10:03:00.714Z

Yay! fill latch is back
Thanks @Elektron love my Digitakt!

vamoscreciendo · 2022-12-20T11:09:04.327Z

Is this a confirmed bug??: My controlall is working good, but then when I press “no”, it’s not coming back to the last state. Can anybody confirm this bug?I think is quite important to have missed it.

rc821 · 2022-12-20T12:14:41.264Z

I think Function - No should reload the pattern and reset any changes made since the last kit save. Works on my DT.

vamoscreciendo · 2022-12-20T12:29:43.893Z

I’m not talking about reload the last saved pattern. I’m taking about trk+encoders and control the parameters of all 8 tracks at once and then while keep pressing trk, pressing no and coming back to the point before you used control all.

vasidudu · 2022-12-20T12:42:49.880Z

rc821:

Function - No should reload the pattern

@vamoscreciendo this is the way for what you are looking to do.

rtme · 2022-12-20T13:04:50.956Z

vasidudu:

this is the way for what you are looking to do.

This is not what he’s looking for. He’s talking about resetting any parameter to the previous value when you press “no” while using CTRL+ALL.

I just tested it on my DT (with firmware 1.30B) and this is working as described: Pressing “no” will reset to the previous value.

From the manual:

6.2.2 CONTROL ALL
If you press and hold [TRK] and change a parameter setting, this change will affect this parameter in all the audio tracks in the pattern. Press [NO] before you release [TRK] to revert the parameter changes. The control all functionality is not available for the MIDI tracks.

I’m not updating (yet) my DT, so maybe someone with 1.40A could test / confirm this?

rc821 · 2022-12-20T14:56:21.755Z

Oh cool! I didn’t know you could do that!

vasidudu · 2022-12-20T14:57:16.288Z

@rtme and @vamoscreciendo
Apologies for misleading
Misinterpretation from my part.

rtme:

Press [NO] before you release [TRK] to revert the parameter changes.

I did not even know about this one

rc821 · 2022-12-20T15:01:06.819Z

Gonna try this out today!

vasidudu · 2022-12-20T15:04:42.016Z

rtme:

This is not what he’s looking for. He’s talking about resetting any parameter to the previous value when you press “no” while using CTRL+ALL.

I just tested it on my DT (with firmware 1.30B) and this is working as described: Pressing “no” will reset to the previous value.

From the manual:

6.2.2 CONTROL ALL
If you press and hold [TRK] and change a parameter setting, this change will affect this parameter in all the audio tracks in the pattern. Press [NO] before you release [TRK] to revert the parameter changes.

Just to clarify, this means that:
I am starting to use the Ctrl All function with the TRK button. I start with Filter Frequency, then Filter Env. At that stage, if by maintaining TRK and pressing NO, it means only Filter Env will revert back to its original state on all tracks?

vamoscreciendo · 2022-12-20T15:32:41.951Z

it should all revert, as long as you keep pressing TRK. in my DT not even one parameter is being reverted. so it is a bug (can someone confirm?). I tryed on my DN 1.40 (didn’t update to 1.40A yet) and it is working as it should.

rtme · 2022-12-20T15:53:47.348Z

vasidudu:

At that stage, if by maintaining TRK and pressing NO, it means only Filter Env will revert back to its original state on all tracks?

Both Filter Frequency and Filter Env should revert back to its original state. At least it does on a Digitakt with 1.30B.

plragde · 2022-12-20T17:26:15.737Z

There are some posts on the Digitone 1.40A thread suggesting Control-All revert doesn’t work, but fewer both here and there than I might expect for such a favourite feature. Intermittent bug? I am now hesitant to apply these upgrades.

vamoscreciendo · 2022-12-20T17:47:33.886Z

Yeah right?! I just took so long to notice because I am not playing with them very often these days, plus, Songmode was distracting me from using that feature… but could it be that it is everywhere but not many people uses it, as we thought?? Like, the two first persons in here had no idea about it… I hope is intermittent. And I am going to try to install 1.40A again. and see if it works.

vamoscreciendo · 2022-12-21T17:21:28.957Z

after asking Elektron about it. they told me that it is a known issue and that it’s being fixed for the next update, btw. I hope it comes soon.

rc821 · 2022-12-21T18:03:26.199Z

Thanks for the info on this!