Hi guys I have a question . I can connect my analog rytm and my analog 4 with a cable are entered on a single of my Mackie 1402 VLZ3 without losing the stereo ?
Thank you for your future response
I don’t have an AR or an A4 but I guess you’ll have 2 pair of stereo outputs. Each one on each machine. You need four cables. Two for the AR and another two for the A4.
Left / Right times 2. Then you can connect to four inputs in your mixer and you’ll have all in stereo. Remember to pan the diferent inputs to left and right for having proper stereo image.
Regards
deka’s right. I don’t have the VLZ3 but looking at pictures of it online, it looks like channels 7-8, 9-10,11-12, and 13-14 are stereo channels, so if you wanted a since eq, pan, and fade for each machine, you could use those as well.
Hi guys thank you for your answer. the problem is that outputs stereo sound already occupied by other hardware . I’ll try to plug into two mono outputs
That will work, then just pan the mono outs full left and right.
Also consider if you really need stereo out of the synths…mono is not so bad and if you are using stereo fx, it might work better anyway.