Chompi

rotallytuined · 2024-06-26T15:31:40.432Z

Secret Chomper here

alexwasashrimp · 2024-06-26T16:21:06.640Z

I got a cheap one for reselling, and for the first few hours I was dangerously close to keeping it. It’s really fun.

However, I don’t think I would find any use for it in my music, other than making creepy atonal background noises, and that niche is taken by the Lyra already.

If you can afford spending that much on something that’s fun but not very practical - go for it. It’s a very enjoyable instrument, and I say it as someone who doesn’t like samplers in general and is absolutely allergic to loopers ever since getting a Reface CS.

Also check whether your feet are screwed in tightly, maybe apply some thread locker even. One of mine got missing, a couple of spare feet is $5 on the website, and shipping is a whopping $18, which is quite impressive for such a tiny package.

NickD · 2024-06-26T19:02:16.314Z

I’ve made my peace with the cost - it’s in the DFAM ballpark and that seems reasonable. I don’t really get the “maybe for $200” comments you often see, but maybe Behringer will step in to make that a reality. In the meantime if I panic I’ll just think of it as a permanently wired Eurorack skiff for one quarter the price.

IronIsIronic · 2024-07-10T13:01:33.724Z

I made this request in March. They seemed to like it. Seems simple to implement. Fingers crossed–

So Chompi has both gate and one shot playback modes for the samples, but it would be gigantic if a latch playback mode was also added so you didn’t have to hold the key down to keep the sample looping. This could lessen the demand for a clock source/metronome as well as give us a quick way to build tracks in a looping fashion while also keeping them separate from each other (multitrack) so we could arrange them elsewhere. Workflow could go like this:

Load a drum loop into a Cubbi slot. Press it once to trigger it while in latch playback mode so it continues to loop until you press it again. While the drumploop plays in a loop, you could go to a Jammi slot and record your chords into the looper. Copy the chord phrase from the looper to a Cubbi slot and play it in latch playback mode, so now you have the drum loop and chords looping together. Clear the looper. Go to a Jammi slot and record your bass into the looper. Copy the bass phrase into a Cubbi slot and play it in latch playback mode, so the drum loop, chords and bass play looping together. Clear the looper. Repeat for all parts. This workflow also eliminates the need for an undo since, if you mess up, you just clear the looper and try again.

Clarke_111 · 2024-07-10T14:41:07.291Z

I think this workflow sounds great, but wouldn’t the looper also record the drum loop you have going? If that could loop in the background and the looper only capture the chords (for example) that would be an amazing workflow.

MattLxx · 2024-07-10T14:59:34.603Z

Seem to be selling on ebay used for £320-350 judging from the few recent sales. Which starts to make it a much more attractive proposition…

IronIsIronic · 2024-07-10T15:33:52.225Z

Indeed it would. I was just thinking in terms of workflow. I’ll leave it up to CHOMPI team to figure out how to implement it. One way might be-- whenever a sample slot is in latch mode, it would automatically disconnect its routing to the looper.

BassesAndPads · 2024-07-10T15:36:59.169Z

Does anyone know what the guts look like? Just curious if it has any analogue parts or is all dsp driven.

First impressions to me was that it was targeted to music gear collectors, with its quirky looks and design. I finally messed around with one and really liked the filter and time stretch as I expected from the videos, but did not see much use for it at the time though, especially at that price point.

It’s always nice to have one hardware sampler that I can tweak live and get unique sounds out of, but for me I’m more focused on making unique hooks and melodies with vocals and samples. Or screwing with sampled chords. I feel like software has really been dominant for those things lately, but I’m open minded.

Honestly surprised they are still updating this thing. Felt like a short term play at the “take my money” crowd, but I’d love to be wrong. Good hardware samplers are always appreciated.

IronIsIronic · 2024-07-10T15:47:41.504Z

I’m at a point of my music-making life where I’d literally pay someone good money to get rid of functionality that I don’t need. I’m also at a point where, if the gear isn’t easy to learn and an absolute blast to use, I won’t buy it. So, hello, Chompi.

Easy + fun = productivity = priceless

Clarke_111 · 2024-07-10T17:44:19.623Z

I would agree with this. It’s the strength of the chompi - I really wish some of my other gear didn’t same (looking at you octatrack and to a lesser extent sp404mk2).

The chompi and the rc505mk2 might be my most used bits of kit (sold the 505 and regret it) simply because they are so easy to use.

I would love a MPC built with the chompi mindset…

kippertoffee · 2024-07-10T18:12:06.321Z

Clarke_111:

I would love a MPC built with the chompi mindset

That’s koala, if you can stand apps

Clarke_111 · 2024-07-10T18:31:54.406Z

Alas, I cannot. I did download it but couldn’t get into it at all. Not sure why.

mleaf · 2024-11-03T07:10:57.114Z

I just discovered this thing trawling the gear pages for one of my local shops.

Seems I’m way out the other side of the hype train bell curve on this one. Also seems some firmware stuff has settled and other cool features have been added like the send / return.

This thing fits my use case exactly, I want to get back into music making and have fun, and make some nice ambient stuff. And at the moment, I think I’m more curious about instruments I don’t really know how to use.

I was sort of considering this OT, DNII, +FX, maybe even DTII setup - but jeebus - it seemed to add up and those boxes are all mighty expensive - even for one. It seems that the Chompi post-hype plateau now sees folks flipping theirs for pretty low prices, so I think I’ll snag one if I can while the goings good.

It means I can get started, combine it with the pedals I want, and in general just start building a collection of sounds I can use down the line, and then perhaps when I pick up another Elektron box later (looking at you, Tonverk) I can more formally sequence and layer things.

Are people still using Chompi and enjoying it? I can imagine for many folks it’s just not the right tool, but I feel like it looks really fun and exploratory.

Dr.K · 2024-11-18T18:15:19.377Z

I have a question for Chompi owners:
Can you also sample in mono or only in stereo?

ddiamond84 · 2025-01-23T13:39:35.090Z

I still love mine even though I barely use it. When I do it’s so sweet and magical. Anyone mess with the newer firmwares? I’m not sure I’ve ever updated mine…

Dr.K · 2025-01-23T14:13:02.729Z

Same here. Still enjoying working with it. It took me a bit to learn how to not use it for something that it’s not. For example trying to record perfect loops with it. Or making whole beats with it. Which is possible but not always easy.

Now i use it in a playful way that is refreshing and reminds me to no overthink the process. I made some cool sounds with just sampling a synth sound or a short sequence and then pitch it down, reverse it, put reverb, delay etc. on it and maybe resample it again.

ddiamond84:

Anyone mess with the newer firmwares?

I just upgraded to 1.1 and only used 0.9 before. So i can’t compare it to the previous firmwares. Everything works fine afaik.

One thing i noticed is that sometimes or actually most times when the recording loops it’s audible. Not a click but something like a very very short dropout or so. Most of the times i can only hear it when i listen back on headphones.

If i copy a loop into the recording buffer it loops without audible artifacts. Just when i record sounds directly into the buffer i can hear where the recording loops.

I think that’s just the way it is but have you experienced the same behaviour?

HoldMyBeer · 2025-03-04T17:39:16.557Z

I posted this in the Chase Bliss thread, but I will crosspost it here:

Looks like Chompi is merging with Chase Bliss, and the two people behind Chompi will be joining Chase Bliss in Minneapolis. Chase Bliss will be taking over support in the future.

Chase Bliss

CHOMPI is joining Chase Bliss! — Chase Bliss

The video is a good watch.

They must like the platform, and I am looking forward to seeing what they do with future firmware updates.

Dr.K · 2025-03-04T21:49:55.328Z

They didin’t say anything about firmware updates with new additional stuff but i sure hope for it. I really like my Chompi but it could use some more effects or other cool stuff.

nate · 2025-03-04T21:54:04.313Z

From the #announcements channel on their discord!

3. There will be more CHOMPI
We’re working on another run of the CHOMPI sampler, and it will have some firmware surprises (also available for free to existing CHOMPI customers). The next run will be sold through the Chase Bliss website like any other Chase Bliss device. This run will be available later this year, though it’s too soon to say when exactly. And don’t worry, we’ll send a newsletter to you all at that time so you don’t miss out.

Mister_Wood · 2025-03-05T20:29:31.679Z

That’s great news, I hadn’t seriously considered Chompi even though I’m currently on a serious sampler kick, but with a company of that stature behind it, with seriously excellent programming & manufacturing chops, I’m definitely far more more interested.