Buchla = Best stand/case for 2 Elektrons?

AdamJay · 2015-04-08T01:20:13.000Z

Wait, what am I thinking… just get two of the single tier laptop stands of the same adjustable height style, and make one taller and one shorter… They’re $21 ea. http://www.amazon.com/PYLE-PRO-PLPTS25-Laptop-Computer-Stand/dp/B004HJ1ZB8/ref=pd_cp_MI_0

I got some cool feet suction laptop risers I can put underneath the top Elektron to get more forward tilt.

klerc · 2015-04-08T01:28:39.000Z

Even just one to make the level difference?

AdamJay · 2015-04-08T01:32:49.000Z

""klerc"":

Even just one to make the level difference?

Right. for sitting, certainly. And then raise it up for standing, i like that flexibility for gigs. You never know what kind of table you’re going to have to set up on. Could be a bar top, could be a card table that’s 28" tall.

Even cheaper here: http://www.bhphotovideo.com/c/product/853198-REG/pyle_pro_plpts25_laptop_computer_stand_for.html

Blue lounge Cool feet or something like these to give more tilt. Place under back feet of Elektron, between Elektron and the laptop stand.
http://www.bhphotovideo.com/c/product/675704-REG/Tucano_ERG22_O_ERGOGEL_Notebook_Feet_Set.html

Too bad they’re closed for passover. Won’t ship till Monday

AdamJay · 2015-04-11T16:29:08.000Z

Cool feet work out pretty nice.
Just using the large two under the A4 gives a great viewing angle.
Suction is solid and stable, no need to use the adhesive pads they ship with.
Comes with little red cinch bag for transport.

IMG_0064.JPG1000×750 206 KB

De_wouzer · 2015-05-03T21:12:34.000Z

This is what I created

this is the tutorial I used:
http://radek-rudnicki.net/elektron-rack/

My equipment never looked that good.
Also playing with it has never been that ergonomic.

I have forgotten the ventilation, just checked and it is all very cool. I hope I will not have problems with it.

Good wood is very expensive, but can be found for free easily. You don’t need so much wood. I found a part of an old bed, made of african hard wood. It is very solid.

Don’t forget, the screws (M3) should not be too long

I am really happy with it…

klerc · 2015-05-03T22:07:54.000Z

It looks good!!!
Awesome job

biologik · 2015-05-11T12:34:42.000Z

""AdamJay"":

Definitely the EIT-1. Never have to disassemble, and I beleive it fits in Pelican 1510 and/or HPRC 2550w (someone correct me if I am wrong)

https://sites.google.com/site/companyofquail/home

Pricey but an elegant solution.

I can confirm that the EIT-1 fits in a Pelican 1510 with room to spare. I posted photos in the old forum if you want to search. It also meets most (all??) carry-on requirements. I’ve taken it overseas and had no issues.

For my other two elektrons that sit right under my computer monitor, I use the Bluelounge Nest. They’re the perfect angle as they don’t interfere with the monitor view but provide a great angle to work with. (Amazon.ca)

mokonline · 2015-05-11T12:49:44.000Z

Hey,

I make stand for the Elektron gears
for 1 , 2 or 3 units , I use MDF , wood from france and plexi from germany
I have a design if you want keep the protective cover
laser engraving for free
start marquetry project

www.zerack.com

15040004.jpg1600×1206 54.2 KB

Ludo

barto · 2015-05-11T18:07:42.000Z

""Dtroy"":

I thought you’re not supposed to block the vents on the sides of the Analog machines? That case you posted, Adam Jay, seems to block the vents. Is this an issue? Otherwise I love the concept.

elektron themselves makes rack mount end cheeks for 19" enclosure so i wouldnt worry.

+1 for the EIT-1. love that thing

Mattstacks · 2015-05-11T19:04:46.000Z

""AdamJay"":

Wait, what am I thinking… just get two of the single tier laptop stands of the same adjustable height style, and make one taller and one shorter… They’re $21 ea. Amazon.com

I got some cool feet suction laptop risers I can put underneath the top Elektron to get more forward tilt.

I have two of the laptop stands from Amazon shown above.

They do work but they are front heavy with Elektron boxes.

You have to counterbalance the stand in some way or there is a pretty good chance that they will fall forward.

Also, the ones that I received do not fit under other equipment very well.

I planned to have them above my AK but the side arms of the Stand do not fit under the AK.

In the end I had to counter balance the stand at the bottom rear, and then place my AK on foam pads, I then cut slits into the foam pads to allow the Laptop Stand to fit under the AK.

Sorry I do not have any pictures, I just moved and my studio is not set up yet.

De_wouzer · 2015-05-11T19:35:29.000Z

[quote=“” klerc""]
It looks good!!!
Awesome job
[/quote]

Tnx, i am really happy with it and i think i Will not change it for a long time, i think.very good ergonomy, and really cheap to make. I used an old bed to have very good wood, no need to buy something new. Good wood Can be found on many places. It took me About 4 hours, my father is a good woodworker, hè helped me.

AdamJay · 2015-05-11T22:40:40.000Z

""biologik"":

For my other two elektrons that sit right under my computer monitor, I use the Bluelounge Nest. They’re the perfect angle as they don’t interfere with the monitor view but provide a great angle to work with. (Amazon.ca)

I wasn’t familiar with the Nest product. Really love the Bluelounge solutions.
The solution i settled on was a combination of 3 pairs of Bluelounge Coolfeet + a Rain Design mStand. This works great for 3 Elektrons.

The Coolfeet are portable for gigs, only using the larger pairs in the rear. The smaller pairs I use for my Nord Drum and FaderMaster. Only using the mStand in the studio, so the fact that it cannot fold up is of no importance to me. It’s also been mentioned that with some of the higher tilting stands, Elektrons become a bit front heavy. I noticed this with the mStand, especially after using Coolfeet to tilt it the instrument forward even more. So I’ve got a small weight on the base of the mStand for stability.

It was very difficult to find a stand for the top Elektron that didn’t require screwing on end cheeks, but also gave great viewing angle and ergonomics, and yet also allowed enough clearance for the cables to pass under from the bottom instruments. The mStand turned out to be the perfect solution.

What I love is the viewing angle and arm reach of all 3 Elektrons, even with a small apple keyboard in front of everything. If I ever add a 4th Elektron, I’ll definitely add a 2nd mStand.

11186310_10206568193265033_1861493846_n.jpg946×460 97.3 KB

koshimazaki · 2015-05-11T23:10:04.000Z

@ De wouzer This looks awesome man!
So great to see someone using same concept.
I just used cheap wood, yours looks solid and indeed nice and ergonomic.
Feels better once playing as well doesn’t it, all the controls are in front of you.

De_wouzer · 2015-05-12T15:40:56.000Z

feels very good, but I think I will make a box around it. Makes it more save for travelling, I can put my cables in it, and I can put my elektron stuff on top of the box when playing live

when using this stand, I want my equipment to stand higher, because of the angle of the top machine (in my case the A4).

klerc · 2015-05-12T15:56:21.000Z

De Wouzer:

Is it ergonomic? isn’t it awkward to use the track button or side button on the units?

koshimazaki · 2015-05-12T17:24:21.000Z

Yeah its not really safe for travel. I just use cheap guitar pedal case for one machine and put the second one in the backpack. Put case underneath both machines while assembled, works great as a stand.

@klerc didn’t have issues with that. Used MD with MnM and OT in various combinations. Recent one was OT and Rytm and that makes nice pair too

De_wouzer · 2015-05-12T19:55:42.000Z

""klerc"":

De Wouzer:

Is it ergonomic? isn’t it awkward to use the track button or side button on the units?

i was afraid for that… but it’s no problem at all. the wood can be less high, if you want to. if you close the wooden frame, the knobs don’t touch because they fit next to each other.

AdamJay · 2015-09-11T20:37:30.000Z

These black Buchla / Radek style cases look very sharp.

elektronbuchla.jpg1600×1200 98.9 KB

The angle on the top instrument looks more relaxed than the EIT-1, and I like that.

I’m wanting to work more with my AR+A4 in tandem, as a single instrument. This layout would help.

AdamJay · 2015-09-11T20:39:00.000Z

https://matrixsynth.com/classifieds/synthesizers/elektron-buchla-style-case-rack-stand-video_i26

klerc · 2015-09-11T22:17:10.000Z

""AdamJay"":

https://matrixsynth.com/classifieds/synthesizers/elektron-buchla-style-case-rack-stand-video_i26

That’s the one that I originally spotted. Seems cheaper too.
Not sure if it is still under production…