Battery LOW

choleric_treehugger · 2014-02-10T13:59:20.000Z

Thank you very much for the help.

Keep up this goooood forum guys!!!

lots of love

GirTheRobot · 2020-12-09T03:48:39.326Z

Just got this message too. Also found this:

Knowledge Base (Beta)

Changing battery on Octatrack MKI/MKII

If you get an error message when you start the Octatrack saying: “BATTERY LOW”, you should change the battery. The battery is a CR 2450 Li-Mn 3v. CHANGING THE BATTERY Unscrew all the M3 Hex nut screws on the top panel. Remove the top pa...

Anyone else here ever changed an Octatrack battery? How long do I have? I assume it just won’t turn on at some point?

Rusty · 2020-12-09T03:53:40.073Z

GirTheRobot:

Anyone else here ever changed an Octatrack battery?

a) Multiple times.
b) A wee while
c) Should turn on, just not save settings. When it keeps asking you what the date is… it’s running low.

Just change it, quite an easy “job”

GirTheRobot · 2020-12-09T03:54:33.174Z

amazon.com

Amazon.com : Varta VCR2450 Electronic Lithium 3V Battery for Cameras/MP3 Player...

Amazon.com : Varta VCR2450 Electronic Lithium 3V Battery for Cameras/MP3 Player and GameBoy (Blue Silver) : Camcorder Batteries : Camera & Photo

I need to buy two of these? Or just one?

Won’t save settings as in what? Won’t save parts and projects?

Microtribe · 2020-12-09T03:54:48.396Z

Just open it up and change the batteries. You’ll enjoy it .

Microtribe · 2020-12-09T03:55:46.031Z

There are 2 batteries in side OT. Replace both of them.

It wont save anything at all without them

Schnork · 2020-12-09T11:25:51.760Z

Sooner or later all your music boxes with the ability to save settings, patterns, projects etc. will need to have the battery replaced.

When you switch the power off, the battery basically runs the thing so it can keep your saved stuff.

Usually it’s no big deal, tho. Just a matter of unscrew, lift of, unplug and exchange.
On some devices it can be a little fiddly, especially when there’s no battery holder.

TransGirlHappyHardcore · 2022-01-19T17:15:39.040Z

I was shopping for an OT mk1, found one for 800 €. The seller called me yesterday and told me he discovered the “battery low” message on startup and so changed the battery.

But something must be wrong because he is still getting the “battery low” message and he has to input the date everytime.

The seller contacted a shop that deals in Elektron machines and they wrote to Elektron.

Elektron answered that there are no real consequences for not solving the battery problem “aside from less convenience”.

Here’s Elektron answer:

“There are no real consequences aside from less convenience. For example, when you save a new project it always suggests the current date, which will be incorrect without the battery. It won’t affect the music-making capabilities of the machine”

Did anybody run into the same issue?
Any idea about this? How much could it cost to have this problem fixed by Elektron?

ark · 2022-01-22T02:28:43.695Z

The manual says that the battery is used to preserve the contents of working memory. So I’m guessing that if the battery is dead, you’ll have to reload from the CF card each time you power it up, and you’ll have to remember to save stuff on the CF card before you power it down.

But I’m surprised that a new battery would still be giving that message. Maybe the new battery was put in backward?

Rusty · 2022-01-22T02:41:02.611Z

TransGirlHappyHardcore:

But something must be wrong because he is still getting the “battery low” message and he has to input the date everytime.

Should have been a CR-2032 and fairly simple procedure. They may have used a wrong battery (a CR-2032 looks the same) or inserted it the wrong way around?

ark:

The manual says that the battery is used to preserve the contents of working memory

Temp memory for date; settings etc afaik

ark:

So I’m guessing that if the battery is dead, you’ll have to reload from the CF card each time you power it up, and you’ll have to remember to save stuff on the CF card before you power it down.

You do that anyway, no?

TransGirlHappyHardcore · 2022-01-22T10:10:45.151Z

He told me that it could be a problem with the battery holder. It would take some soldering to fix it, but that could result in some damage to the board.

Any idea about this? How much could it cost to have Elektron fix it? And how long would it take?

I was going to buy that OT for 680 €, but now I’m really not sure about buying it at all.

According to you, what would be a fair price for that damaged unit?

ark · 2022-01-22T15:12:09.652Z

I’m accustomed to the OT having whatever project I was last working on already available when I turn it on.

From the manual (page 15):

The memory used for storing patterns and parts is powered by a battery inside the unit. It will hold data at least 6 years before needing replacement. If the battery needs replacement, the “BATTERY LOW” message will appear in the display.

Microtribe · 2022-01-22T21:40:55.014Z

I wouldn’t buy the OT you are looking at. Its cheap for a reason.
Walk away, find one that isnt damaged, or has issues of any kind.

TransGirlHappyHardcore · 2022-01-22T21:58:53.611Z

Actually the seller was asking for 800 € in the beginning, before discovering the battery issue.

680 € seems a fair price to me for a OT Mk1 in good shape. But mk1s are pretty difficult to find in my area, especially in good shape.

HOLYB · 2022-04-25T16:22:56.546Z

I just did it with the the black edition and there was only 1 battery inside, instead of the mentioned 2.
time needed: 10min, without unplugging anything! It looked very neat inside! Cool!

swanage_fan · 2022-08-15T20:18:23.813Z

why would my three month old OT Mk2 suddenly start complaining about BATTERY LOW on boot? i’m scared.

this is the same OT that was dropped a few weeks ago but seemed to be fine since then except for a couple of very slightly off-axis encoders (which i know will need to be fixed when i can afford a new I/O board)

swanage_fan · 2022-08-15T20:33:30.614Z

if the battery was displaced somehow/a connection was broken, would it still say “battery low” or would it say something else like “no battery”?? someone help! i’m really bummed

ringokidf · 2022-08-15T21:06:56.218Z

I have had a Battery Low twice on my mki in the 10 years I’ve had it. It’s very easy to pop in a new one and they are about 5 €.

But I wouldn’t expect it to happen on a 3 months old machine.

swanage_fan · 2022-08-15T21:17:45.769Z

no, that’s why i’m scared there is physical damage. oh well, i’ve ordered the hex wrench and the batteries so i’ll know for sure in a couple of days…

Microtribe · 2022-08-15T21:50:57.190Z

Probably just a loose connection. Open it up, give the batteries a jiggle, reseat the ribbon cables, power it up.