AR - Project/Dir/Samples HELP!

rob_lee · 2014-08-09T22:17:34.000Z

Hello, tonight I sat down with the AR and started to load my own samples in there so I did the following.

1 Create new Project
2 Create new Dir
3 Set upload to that same Dir (upload here)

I then selected 100 of my own samples to transfer via C6… I sat there thinking FFS it’ll soon be christmas This thing is so slow at transferring samples. Is this normal?
Also taking in to consideration that I created the above 1,2 & 3 once I had loaded (some samples about 12) they ended up being at the end of the factory samples, How is this possible if I created a new DIR?
So instead of my samples appearing in slot 1-12 they were dumped in at slot 120 onwards?? I don’t get this so if anyone can shed some light. The only way I can have my own samples starting from slot 1 is if I do an Empty Reset.

I also have the OT and I just wish that because the AR uses samples that it also had the SD card slot cause C6 is a pain to transfer samples to AR. So anyways if someone can tell me what i’m doing wrong here i’d appreciate it very much.

Thanks

Rob

Biome_Digital · 2014-08-12T20:05:23.000Z

Are you Rob_Lee on KVR? If so, hello!

Did you set the directory to ‘Upload here’? If I upload a few samples first then want to re-upload with some others, I delete the old ones first. Just seems less complicated.

How long are the samples? I uploaded about 100 one shots in maybe 5 minutes or something. Not loads more.

L4rs3rik · 2014-08-12T21:07:18.000Z

127 user sample slots are available for each project. If you’re in the preset project there’s factory samples there.

Just create a new project and you will have all the samples slots (and memory) for your self.

L4rs3rik · 2014-08-12T21:09:21.000Z

[quote=““Biome Digital””]
Are you Rob_Lee on KVR? If so, hello!

Did you set the directory to ‘Upload here’? If I upload a few samples first then want to re-upload with some others, I delete the old ones first. Just seems less complicated.

How long are the samples? I uploaded about 100 one shots in maybe 5 minutes or something. Not loads more.
[/quote]

You must have magical powers or very small samples. I envy you.

rob_lee · 2014-08-12T21:14:02.000Z

""rob_lee"":

Hello, tonight I sat down with the AR and started to load my own samples in there so I did the following.

1 Create new Project
2 Create new Dir
3 Set upload to that same Dir (upload here)

I then selected 100 of my own samples to transfer via C6… I sat there thinking FFS it’ll soon be christmas This thing is so slow at transferring samples. Is this normal?
Also taking in to consideration that I created the above 1,2 & 3 once I had loaded (some samples about 12) they ended up being at the end of the factory samples, How is this possible if I created a new DIR?
So instead of my samples appearing in slot 1-12 they were dumped in at slot 120 onwards?? I don’t get this so if anyone can shed some light. The only way I can have my own samples starting from slot 1 is if I do an Empty Reset.

I also have the OT and I just wish that because the AR uses samples that it also had the SD card slot cause C6 is a pain to transfer samples to AR. So anyways if someone can tell me what i’m doing wrong here i’d appreciate it very much.

Thanks

Rob

Hello,
Yes i’m on KVR too and VSE and I just listened to your demo for the AR so congrats that’s top notch.
About the Project etc I must be doing something wrong cause I create a new project then a new DIR… I then point to upload here. All is good but still my samples are loading from slot 120 onwards. The only way iv’e managed to load all my samples from slot 1 onwards is if I do an empty reset.
Probably user error so i’ll try again tonight… Got an A4 coming thursday to go with AR and OT… sold the last one (big mistake )
Anyways thanks for the tips guys i’ll come back in a short while and say how I got on.
Rob

L4rs3rik · 2014-08-12T21:34:40.000Z

Perhaps you’re not switching to the new project? (Wild guess…). After creating a new project you need to load it.

Samples you upload don’t belong to any project, they are on the +Drive.