Any way to allow 'Ctr-8p' machines to control 'Ctr-All' machines

Martinukai · 2015-01-21T00:17:38.000Z

Can’t seem to do this on my Machinedrum.

Does anyone know of workaround?

Cheers!

biologik · 2015-01-21T00:31:58.000Z

supposedly not…
https://elektron-users.com/index.php?option=com_fireboard&Itemid=28&id=106153&catid=9&func=fb_pdf

Martinukai · 2015-01-21T01:00:32.000Z

""biologik"":

supposedly not…
https://elektron-users.com/index.php?option=com_fireboard&Itemid=28&id=106153&catid=9&func=fb_pdf

Cheers for that.
Not the end of the world.
My trouble occurs when I’m tweaking both a CTR-8p and CTR-All machine live side my side on tracks 15 and 16.
I continually accidentally change the routing of the CTR-8p machine. I use the ‘Effects’ page on the CTR-ALL and when I return to the CTR-8p machine I forget that I’m still on that effects page and end up messing up the track and parameter assignments.
Just got to be more careful I suppose.
Thanks again biologik!

biologik · 2015-01-21T01:20:31.000Z

Question: why use the CRTL-AL machine?
Why not just FN+knob?

Martinukai · 2015-01-21T01:41:11.000Z

""biologik"":

Question: why use the CRTL-AL machine?
Why not just FN+knob?

The CTR-All machine has crazy effects that effect the whole track which isn’t possible by FN+knob-ing?
Maybe there’s something I’m missing here…

biologik · 2015-01-21T01:44:50.000Z

Same thing (one small difference only for sequencing)… from manual:

CONTROL ALL “CTR-AL”
This machine simultaneously controls the chosen
parameter or parameters for all 16 tracks. Manipulating
one parameter on the CTR-AL machine will affect the
corresponding parameter on all 16 tracks. Note that
CTRL-AL does not affect the MIDI machines or the
SYNTHESIS page of RAM RECORD machines. The
functionality of this machine is similar to the [FUNCTION]

DATA ENTRY knobs operation described on
page 37 . The major difference is that using this
machine, you can set trigs.

I never use the Ctrl-Al machine because I just knob+FN it!

analogback · 2015-01-21T01:47:15.000Z

afaik its the same.
the func + knob needs the ability to include or exempt either certain tracks or certain machine types. it’s kind of important to add this functionality