And again a new problem :(

void · 2014-07-27T15:35:08.000Z

it is a baby and still learning to speak.
be nice to it
it needs your love

poisk · 2014-07-27T15:39:34.000Z

Fuck it ! I’m really bored with this machine right now.

poisk · 2014-07-27T15:40:36.000Z

Each time I put new samples into it, it looses some at the same time. But not the same day… It’s the surprise.

OHEXOH · 2014-07-27T16:12:02.000Z

Sounds like there could be an issue with your RYTM? Might be worth seeing what Support suggests.

However I do think the machine feels slightly underdeveloped. I understand that upgrades will make it nicer, but it should be good from the get go. A €1500 machine shouldn’t feel like a Beta test program.

tonight · 2014-07-27T16:32:34.000Z

""void"":

it is a baby and still learning to speak.
be nice to it
it needs your love

Maybe its just a bitch who wont talk to you and you need to dump it.
Slightly more helpful to the op
Have you done a hard reset?
Have you tried re-loading the O/S?

void · 2014-07-27T16:49:06.000Z

it speaks Serial IO fluently

can’t say I’ve encountered this issue anyway.

poisk · 2014-07-27T17:31:17.000Z

Tonight: I’ve already have a lot of work inside, I don’t want to take to risk to reset it. My project is saved, but no I’m really afraid with this buggin’ machine.

The first time I’ve had this pb, it was with the previous OS, and now, it’s under the new one.

poisk · 2014-07-27T17:42:48.000Z

What’s really strange and badly done: the saved project has also lost the samples. Why ? How is it possible ? The project doesn’t take the samples in the saving process ?

Is there anyone from Elektron here ? Allo ?

void · 2014-07-27T17:59:17.000Z

did you delete or re-order any samples on the +drive?

the samples in the RAM are copied from the +drive to the RAM when a project is loaded (e.g. also when the machine is booted). So if you mess with the +drive sample content, be careful…

poisk · 2014-07-27T18:36:49.000Z

Yes, I’ve uploaded some new samples inside…

As I understand, the saved project only contains infos about the samples. ok.
It’s a sysex, so no problem with it.
But we should be able to dump on the computer the samples used by the project, we can dump everything excepts samples, bad idea too me.

panelist · 2014-07-27T18:48:00.000Z

In Global settings -> Sequencer config

see if ‘kit reload on chg’ is checked

it may be that if this option is checked and you are not saving your kit, then whatever changes you made to your kit (including sample assignment) may be lost when you restart the machine.

but this is just a guess

poisk · 2014-07-27T18:59:52.000Z

I save all my patterns super often, that’s not the problem

panelist · 2014-07-27T19:05:52.000Z

was the option checked?

it could still be a bug related to that option, even if you are saving your kits, so it would be worth 3 seconds of time to check

stutech · 2014-07-27T19:17:00.000Z

Just to rule out any format conversion probs, are all your samples 16/48 mono format? There might be a problem related to specific bitrate etc…

I haven’t experienced any data loss of any form so far, but will keep a look out for any losses in the future. Your using the latest OS?

poisk · 2014-07-27T19:22:09.000Z

Kit reload is not checked.

I only use 44.1/16 samples.

Dataline · 2014-07-27T19:31:23.000Z

Interesting, never encountered issue of Samples being lost.

Are you sure they were deleted from the +Drive? Or the KIT sample assignments were lost?

poisk · 2014-07-27T19:37:41.000Z

From the drive, and from the pool.

The kits still have the assignation, but the sample is missing.

I’m gonna put back all my samples and then save my project with a new name. Then, we’ll see and try to import new samples again.

Dataline · 2014-07-27T19:55:46.000Z

OK, try that.

Keep in mind that the Project does not save which samples are stored in the +drive. Project saves which samples are assigned to the Sample List in that project.

If the samples are disappearing from the +drive, that would be a different issue.

poisk · 2014-07-27T20:05:43.000Z

Thanks, I’ll check carefully now.

new save is done, i’ve reuploaded my samples, now I’m gonna import them in thepool. Then save the project again.

It would be really great to be able to export the samples uses in our projects. We have the USB, so let’s use it

Dataline · 2014-07-27T20:11:57.000Z

Yeap, I agree about exporting samples from the machine!