Analog rytm to recall presets of other Hardware

[Guiguiboo300]

Been looking for that but can t find it with analog rytm mk2.
Digitakt is nice and easy but how to tell a pattern to recall a patch from another hardware via midi ?

Thanks

[RustyRoses]

Do you mean Program Change?

Receiving MIDI program changes

I’ve done a good deal of searching about this, even blowing through some threads regarding how to do it on the older Elektron machines, both here and just general Google searching, but I’m not having any luck finding anything. Most people seem to use their Elektrons as the brain, so there’s not a lot of info on incoming messages. I’m using a Squarp Pyramid to sequence several synths. Program changes and LSB/MSB info are stored right with the tracks, so when you fire them, the change is instant,…

[Guiguiboo300]

Yes I do sorry I did not explained that very well.
Would like to program change from analog rytm to another synth

[vestibule]

You can do it but the target program change will be exactly the same as on your Rytm. Pattern A1 is program change 1, A2 is 2, and so on until H16, which is 128.

The Monomachine (and I would assume the Octatrack as well?) allows more flexibility on the external MIDI tracks, where you can assign any program change you like.

[Hokus]

the Rytm can send out midi program change messages based on the pattern you select

PRG CH SEND will when active send program change messages when patterns are changed. The
MIDI channel that will send program change messages is set in the MIDI CHANNELS menu, covered
on page 56.

MIDI program change messages 0–127 selects pattern 1–128 (A01–H16) on the Analog Rytm MKII. Additionally, MIDI CC and NRPN messages can be sent to control various aspects of the Analog Rytm MKII. See
“APPENDIX C: MIDI” on page 82 for a complete specification.

[Guiguiboo300]

Excellent !
Thank you all