I try to connect them “Oktakontrol Midi-Out to Midi-In of the Analog Rythm” but unfortunately not working. Could you please advise in this matter ? Do I need new software ?
Can you use a midi monitor to check what is sent by the Oktakontrol?
If it’s CC7 (OT track LEVEL), on midi channels 1-8, it should be possible to control AR Amp VOL (CC7) on tracks 1-8 if they are set to midi channel 1-8.
If it’s CC25 (OT Amp VOL) it would change AR SAMPLE FINE TUNE. I’d check that page on track 1-8. In that case you need to edit the firmware.
Try going to the midi settings in the OT and that sub menu that is showing turbo midi speed. There’s a setting to refresh/select that one and if you see it getting to something like 2x speed, it should work.
Also, the startup sequence could be something to try out differently (OT first or last).
Aaaah! Saw it’s about AR - sorry! Hopefully it’s got a similar setup for the midi.
I check every where… the Analog Rytm MK1 don’t have any midi monitor check list !!
AR don’t have a midi monitor. You can use a computer + midi interface to monitor midi.
What are your AR midi channels?
You need those settings :
INPUT FROM MIDI(+USB)
RECEIVE CC/NRPN on.
Did you check Sample page if Sample Fine Tune is changed while moving Oktakontrol?
I using the mixer to play live and I don’t have the midi interface. I should buy now !!
Which one do you recommend me ?
I have this cable do you think I could use this at the moment. To monitor the midi on computer ??
Should work to monitor Oktakontrol, but you can make some tests with AR.
I’d check Oktakontrol default settings.
Check all pages of AR track 1 (midi channel 1) while moving Okta fader 1.