Hello guys,
yesterday i tried for the cv capabilities of my A4. i’ve wanted to control the op1 through the a4 sequencer:
a4 (cv) -> oplab (cv=midi) -> op1
i’ve setup the CV A as pitch V/oct and CV B as gate, the i’ve followed this:
Select NOTE 1, it could for example be C3. Then highlight VOLTAGE 1 and press the [YES/SAVE] key. This will trigger a C3 note which is played for as long as you hold down the key. While keeping [YES/SAVE] pressed, adjust the voltage until the controlled synthesizer actually plays the note C3 using [ARROW] keys [LEFT]/ [RIGHT] or DATA ENTRY KNOB A. If you don’t have a tuning device, we recommend you play the correspond- ing note on one of the Analog Keys internal tracks and tune by ear.
Repeat the process for NOTE 2 and VOLTAGE 2… here there is my first problem: on my first click i get a note between C3 and C6, and the same happen passing from C6 to C3.
the same if i play on A4 keyboard. for example i play C, then G, i get for example a E, the i reclick the G button and i get the G.
do you know if i can do something to solve this??
thanks
E