A4 Track Problem

babybonnet · 2014-11-18T04:50:31.000Z

Hey,

Iv been having an issue with the tracks on my A4. Track 1 is fine and works as usuall but tracks 2 thru 4 and the FX all have a dimmed light instead of the full green color. Any track with the dimmed green light wont play back the programmed pattern from the sequence but sounds will play if i play them live via the little keyboard. Any ideas how to get the dimmed tracks back to the normal state that enables the sequenced patterns? Any help would be much appreciated.

photo_2.JPG392×522 144 KB

Track 1 has the normal light, where as track 2-4 and the fx track is dimmed and CV has the normal light.

djd_oz · 2014-11-18T05:11:49.000Z

I can’t see the image, however try pressing the Func + Trig, this will bring it back from a trigless trig to a normal trig.

babybonnet · 2014-11-18T05:19:15.000Z

its not the trigs thou, its on the tracks on the right side of the machine. i tried restarting the machine as well as loading up a new kit and its still there.

djd_oz · 2014-11-18T07:04:42.000Z

O.k.

Don’t think I’ve seen this before, maybe an empty or factory reset?

Deep_Cycle · 2014-11-18T08:05:04.000Z

Try holding the song or chain button wile pressing the effected track, that should sort it for ya…

sicijk · 2014-11-18T08:45:18.000Z

I have noticed the same…this happens, if I dont remember bad, when both Chain and Song buttons are both lit. I do not remember the related function though.
NExt time I’ll try yours, DeepCycle ! =)

So far I have sorted it out by pressing FUNCT+CHAIN or SONG (don’t remember properly)

Also should there be similar thread about this somewhere among the other kilos threads here

babybonnet · 2014-11-18T10:02:33.000Z

Deep Cycle solved the problem, thanks everyone for the advice. Much appreciated